No rewiring
Install it without replacing the existing receptacle.
Installs in secondsOne screwdriver
Both outlets stay openNothing to plug in
Dusk to dawnAutomatic lighting
Built to lastUp to 25 years
No plug-in night-light
Automatic dusk-to-dawn light
Both outlets remain available
Your easy renovation win
Choose your style and packAdd smarter lighting in seconds.
Built-in LED lighting turns on automatically when the room gets dark, while both outlets remain open for everyday use.
Secure Shopify checkout
Confirm your current return policy
Select the correct outlet style
:)
The easy part
Your renovation list is long. This part is easy.
Painting takes preparation. Flooring takes time. GuideLight gives you an immediate, useful upgrade without opening the wall or calling an electrician.
No batteries
There is nothing to recharge or routinely replace.
No lost outlet space
Both outlets remain open for everyday use.
See how easy it is
One screwdriver. Three simple steps.
No rewiring. No complicated setup. No electrician required.
Remove the old cover
After turning off power, remove the existing outlet cover plate.
Place the GuideLight
Position the compatible GuideLight over the existing outlet.
Tighten and enjoy
Secure the screw, restore power, and enjoy automatic lighting.
Turn off power at the breaker before installation and confirm that your outlet is compatible. Follow the official installation instructions included with the product.
How it works
The lighting is built right in.
GuideLight replaces your existing cover plate and adds automatic nighttime lighting without occupying either outlet.
Power from the outlet
SnapPower contact prongs connect with the outlet's terminal screws.
Automatic light sensor
The light responds as the surrounding room gets brighter or darker.
Downward LED light
Built-in LEDs place a soft glow along the wall and floor.
Nothing to plug in
Both receptacles remain available for your everyday devices.
Light sensor
Open outlets
Built-in LEDs
A cleaner solution
Keep the light. Keep the outlets.
GuideLight adds useful nighttime lighting without the clutter or lost outlet space of a traditional plug-in light.
What matters
SnapPower GuideLight
Plug-in night-light
Outlet availability
Both outlets remain open
Uses outlet space
Installation
Replaces the cover plate
Plugs into the receptacle
Appearance
Low-profile, built-in design
Extends away from the wall
Automatic operation
Dusk-to-dawn sensor
Varies by product
Batteries
No batteries required
Varies by product
Room by room
A small upgrade for every room.
Add a soft path of light through the places you move through most after dark.
Choose the correct fit
Match the GuideLight to your outlet.
Look at the shape of your current outlet before ordering. Select the GuideLight style that matches the receptacle already installed in your wall.
The electrical outlet itself is not included.
Duplex
Two rounded receptacles with a center screw between them.
Décor
A single rectangular opening surrounding both receptacles.
GFCI
A rectangular outlet with visible test and reset buttons.
View the GFCI option
Standard GuideLight Décor models are not compatible with GFCI test/reset outlets. Use the current GFCI-compatible GuideLight product where required.
Everyday improvements
The kind of upgrade people notice.
Simple. Useful. Repeatable.
The Best Night-Light in history
A fast finishing touch
The install was quick, the plate looks clean, and the hallway now has exactly the amount of light we needed.
Both outlets are still available
It looks much cleaner than the plug-in light we replaced and does not take away an outlet.
We added more around the house
After trying the first one, we installed them in the bathroom, hallway, and guest room.
Product details
Small profile. Useful performance.
Its so Easy!
Standard single-gang cover plate
Current GuideLight specification
Current GuideLight specification
Warm neutral light
Bright setting specification
Based on current product messaging
Questions, answered
Everything to know before you install.
No electrician needed!
Does GuideLight require wiring?
No. It is designed to install without adding separate wiring or replacing the existing receptacle.
Does it use batteries?
No batteries are required.
Does it leave both outlets available?
Yes. The LEDs are built into the cover plate, so both receptacles remain open.
How does it turn on and off?
A built-in light sensor responds to the surrounding light level and operates the LEDs automatically.
Which outlet style should I choose?
Choose the GuideLight style that matches the shape of the receptacle already installed in your wall. Review the compatibility guide on this page before ordering.
Does the standard GuideLight work with GFCI outlets?
Standard Décor GuideLight models are not intended for GFCI test/reset outlets. Choose the current GFCI-compatible GuideLight product instead.
Is the electrical outlet included?
No. GuideLight is a replacement cover plate. The existing compatible electrical receptacle remains in the wall.
What tool do I need?
Most installations use a screwdriver. Turn off power and follow the official instructions included with the product.
Finish the room
One simple upgrade. An everyday difference.
Add automatic nighttime lighting without wires, batteries, or a blocked outlet.
No wires
No batteries
Both outlets stay open
Choose your GuideLight
Ready for the easy part?
Select the outlet style, color, and pack that fit your home.
GuideLight
Duplex / White / 3 Pack