We provide a one year warranty that all of our products will be free from defects in materials and manufacturing, under normal use and proper handling. Please contact support@snappower.com if you have questions regarding this warranty.

All orders take about 1-2 business days to process, and then an additional 2-6 business days for shipping within the US / 6-12 business days for shipping to Canada.  

Absolutely not. Our products draw power directly from the outlet.

No problem! The product will install horizontally and work just fine. Just make sure to install where the bottom of our plate lines up with the ground side of the outlet! We have many customers who have done this and love it!  

We currently ship to the U.S., Canada, and Mexico.

At this time we only sell through our website, we are not in any retail stores.

No. SnapPower does not allow any third parties to resell our products either online or in retail without written authorization. This would be a violation of our terms of service.

Customs and duties are fees applied to imported goods or products into your country. Unfortunately, we have no control over these charges and cannot predict if they will be charged or not. Likewise, if they are charged we have no control over the amount that is collected. There are some cases when duties fees are not collected at all.When ordering from SnapPower, you are responsible for these fees as well as assuring that you can lawfully import them into your country.

Returns/Exchanges 

To be eligible for a Return/Exchange, your item(s) must be in the same condition that you received it and must be in the original packaging and include all components. Contact our customer support team at support@snappower.com to receive a Return Merchandise Authorization (RMA) Number. 

 Refunds

You have 30 calendar days to return an item(s) from the date you received it for a refund. Once we receive your item(s), we will inspect it and notify you that we have received your returned item(s). We will immediately notify you on the status of your refund after inspecting the item(s). If your return is approved, we will initiate a refund to your credit card (or original method of payment). If you receive a refund, the cost of shipping will be deducted from your refund. Restocking fees may apply. You will receive the credit within 7-14 business days, depending on your card issuer's policies. We stand behind our products and always do our best to take care of our customers. If your order exceeds the 30 days, you may be eligible for an exchange.

 Shipping 

 You will be responsible for paying for your own shipping costs for returning your item(s). Shipping costs are non­refundable.

The LED lights in our lighting products are a neutral white temperature. Approximately 4,000 Kelvins.

Yes, our GuideLight 2 Plus is compatible with GFCI outlets. Make sure you buy the GFCI version and not the standard decor version!

The GuideLight will last for up to 25 years before the LEDs begin to dim.  

The GuideLight costs around 10 cents a year to power (depending on your local cost of power).  

1. The Original GuideLight includes a light sensor that turn the LEDs On/Off automatically. It is designed to increase or decrease slowly depending on the amount of light in the room. They should be at full brightness when the room is completely dark and slowly dim as the room gets lighter. 

2. The GuideLight 2 PLUS includes a light sensor AND also includes a switch that allows you to adjust the brightness between Bright, Dim and Off settings.Both products are designed to increase or decrease slowly depending on the amount of light in the room. 

They should be at full brightness when the room is completely dark and slowly dim as the room gets lighter.

Yes! The GuideLight has been designed to the highest standards of safety, and is ETL listed in the US and Canada.  

All of them! The Charger charges all devices that use a standard USB.

1. The Original Charger includes 1 port and 1Amp of charging power. 

2. The Charger 2.0 includes 2 ports and 2.1Amps of charging power.

We engineered the Charger with premium parts to ensure that it lasts for as long as possible. We estimate that the Charger will last for at least 10 years under normal use.

Yes. Similar to other USB charging devices, the Charger has built-in surge protection.  

The SnapPower Charger is designed to work in only one orientation. The USB port is designed to be installed on the same side as the ground prongs on the outlet. For example: If the ground prongs on the outlet are facing down, the Charger will need to be installed with the USB port beneath the outlet. If the ground prongs on the outlet are facing up, then the Charger will need to be installed with the USB port above the outlet.

Yes! The Charger has been designed to the highest standards of safety, and is ETL listed in the US and Canada.

There are likely 2 types of light switches in your home, and we have a SwitchLight for both! 

1. Single gang, single pole switches. This means that the SwitchLight installs over a single light switch, and that the SwitchLight will work in areas where one light switch controls the overhead lights. These are typically found in bathrooms and small rooms, where one switch controls the overhead lights. Our SwitchLight is perfect for those.

2. 3-way & 4-way switches. These are the areas where 2 or more switches control one set of overhead lights. These are typically found in hallways and larger bedrooms & bathrooms. Our SwitchLight for 3 & 4 way switches is perfect for those. 

Please note that areas with two light switches controlling the same overhead lights (like a hallway) sometimes have the light switches installed upside down (with the screw terminals on the left hand side of the light switch instead of the right hand side). If this is the case, the light switch will need to be turned around so that the screw terminals are on the right hand side of the switch before the SwitchLight is installed.

Yes! We now how The SwitchLight for 3 & 4-way Switches. This product is compatible in areas where 2 or more switches control the over head lights. Click here for your SwitchLight options .

No, the SwitchLight only works with standard toggle and decor light switches. The SwitchLight will not work on dimmers, motion sensing, or smart light switches because they do not have the required screw terminals for the SwitchLight to draw power from.

Yes! The SwitchLight has been designed to the highest standards of safety, and is ETL listed in the US and Canada.

The SnapPower SwitchLight is designed to be energy efficient, and uses less than 10 cents of energy for the entire year.

The SwitchLight is designed to pull power from the screws on the right hand side of the light switch, which means the SwitchLight will install with the lights pointing down. If you want the SwitchLight to install with the lights pointing up, you will need to turn off the power and turn your light switch around so that the screws are on the left hand side of the light switch.

The SafeLights will last for up to 25 years before the LEDs begin to dim.  

The SafeLight costs around 10 cents a year to power (depending on your local cost of power).

There are 2 ways that the SafeLight turns on and off:

1. It has a small switch on the face of the plate that can adjust the brightness levels to dim and bright. There is also an “off” setting, so if you ever want the lights off, even during the night, just turn the switch off! 

2. Located behind the switch is a light sensor. This light sensor will automatically turn the LEDs off during the day, and at night, the LEDs will turn back on gradually as the light in the room is decreased.

No. The SafeLight uses the same core, prong technology that is in the ETL listed GuideLights, Chargers and SwitchLights. Even though there are many products available on the market that use sliding safety doors (SnapPower’s is the only one with a light), ETL will not certify these products. This is because the safety door keeps the plug from going ALL they way into the outlet. The circuitry is still designed to meet ETL standards.